TRC – H 3.0 kW power supply

Efficiency up to

1%
Design in of newest power semiconductors

Small formfactor

1%
High power density

Output voltages up to

1V DC
Further variantes: 150V DC and 400V DC

Cascadable

1 kW
Up to 4 power supplies can be cascaded

TRC – H 3.0

The Terepco TRC-H 3.0 kW switch mode power supply is suitable to supply your application, either to drive led arrays, for inductive heating or other industrial applications. The power supply was developed by Terepco in Germany which has long experience in the field of industrial power electronics.

The TRC-H 3.0 kW switch mode power supply has an insertion option for the following versions:

  • 9886150 20-150V DC 0-20A
  • 9886250 125-250V DC 0-25A
  • 9886400 200-400V DC 0-7,5A

Other output voltages between 150V and 400V DC are also possible.

  • Compact formfactor
  • High power density
  • High efficiency
  • Power factor correction
  • Aux power supply with 12V DC
  • Analogue control interface
  • Voltage + current control
  • Remote on/off
  • Overvoltage + overcurrent control
  • Cascadable up to six power supplies
  • LED driver
  • Induction heating
  • Laser application
  • HF generator
  • Industrial applications
Mains input185 - 265 V AC
Input line freq.45 - 65 Hz
Hold up timeClass B 10ms 230V AC
Power factor> 0.98
Output voltage load regulation± 1.0%
p/n 988515020-150V DC 0-20A 3000W
p/n 9885250125-250V DC 0-12A 3000W
p/n 9885400200-400V DC 0-7,5A 3000W
Auxiliary powersupply12V DC 1A
Ripple [mv]1200 [mV] p-p
Efficiency94% @ max. load
ProtectionsOvervoltage
Overcurrent
Short circuit
Over temperature
Operating temperature0º to +40º C
Storage temperature-20º to +85º C
Cooling Forced air cooling
Noise level 41,5 dB
SafetyEN 62368-1 pending
EMC EmissionEN 55011 Class A
EN 61000-3-2
EN 61000-3-3
EMC ImmunityEN 61000-4-4 / EN 61000-4-5 / EN 61000-4-6 / EN 61000-4-11
Dimension266 x 227 x 120 mm
Weight3,5 kg
Connectors
InputK3 PC6/3-STF-10,16
OutputPC6/2-STF-10,16
ControlK2 MCVR1,5/11-STF-3,5
back to overview
sales@terepco.eu